Record Impacts

After the hub and targets are connected, ShotCaller can record impacts as part of your session.

Start with a clean check

Before you fire, confirm:

• the hub is connected
• the correct target is active
• the distance is right
• your selected ballistic profile matches the rifle and ammo you are using

Open Range and tap the adopted target on the map before your first shot. Review the distance and hold data from the firing line so the setup matches what you intend to shoot.

During the session

As you shoot, watch for impacts to appear on the correct target in the app. If you see a missed connection or a target mix-up, pause and correct it before continuing.

After the string

Open the session review and look for:

• impacts attached to the right target
• a consistent distance for the setup
• the right rifle profile on the session
• the shot string you expect to save or compare later

When to stop and reset

Pause the session and recheck setup if:

• impacts are appearing on the wrong target
• a target disappears from the app
• the hub loses connection to your phone

For connection recovery steps, go to Troubleshooting.